ozdat.com
http://ozdat.com/forum/

4 Bolt 180B Steering Box into a 1600?
http://ozdat.com/forum/viewtopic.php?f=30&t=34591
Page 1 of 1

Author:  Woznaldo [ Mon Jun 19, 2017 5:55 pm ]
Post subject:  4 Bolt 180B Steering Box into a 1600?

I did do a search and found a quite a bit of info, but just want to be sure.

So, as per the subject, can I fit a '4 Bolt' steering box from a 180B to my 1600? From what I have read, I can if I have the later collapsible steering column?

Without knowing too much about the differences in columns, I had quick look at mine and it appears to have a round ribbed outer sheath that to my mind would be the collapsible version?

A friend has offered it to me and my std 3 bolt box is worn and at max adjustment.

Advice appreciated.

Woz

Author:  Nissanman [ Mon Jun 19, 2017 6:36 pm ]
Post subject:  Re: 4 Bolt 180B Steering Box into a 1600?

Sounds like it is all go. Only the very early 510s had the spear column :roll:

Author:  Woznaldo [ Mon Jun 19, 2017 6:43 pm ]
Post subject:  Re: 4 Bolt 180B Steering Box into a 1600?

Many thanks Graeme.

Author:  Mr Dazda 13B [ Fri Jun 23, 2017 12:10 am ]
Post subject:  Re: 4 Bolt 180B Steering Box into a 1600?

I have a 4 bolt in the Rally car, all Good :)

Page 1 of 1 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/