Ozdat Home Feature Cars Ozdat Classifieds Event Calander Links Trade Link Tech Resource Merchandise Donate Web Mail
It is currently Wed Aug 22, 2018 11:24 am

All times are UTC + 10 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Wed May 28, 2014 12:06 am 
Offline

Joined: Sat Aug 05, 2006 8:27 pm
Posts: 19
Hello everyone

I have the front end out of an autocross/khanacross Stanza for a quick freshen up which has grown legs, as quick freshen ups always do.

Before I convert the front struts to Commodore tubes and fork out for new Bilsteins, does anyone have a definitive blow by blow description of the S13 conversion?

I have searched for full details on many forums and google but there is no detailed explanation of the conversion, its performance highs and lows, or the items needed.

The car will be used for autocross/khanacross and the occasional track day and maybe club rally.

Many thanks for your help.

Cheers
Barney


Top
 Profile  
Reply with quote  
PostPosted: Wed May 28, 2014 2:36 pm 
Offline
User avatar

Joined: Mon Mar 21, 2011 12:22 pm
Posts: 100
I have/had this setup in my stanza. I bought it like this. The rod between inner and outer tie rod ends had been machined to accept stanza inner tie rod ends and s13 outers. I had some longer soft brake lines made up. drilled the holes in the crossmember for the lca bolts out to 14mm (from 12mm). The struts bolted in without issue. I have had the castor rods machined (one of the ones I bought was bent) to allow more castor. the outer tie tod ends are rose jointed.

edit: the LCA's were drilled so the stanza castor rods bolted in (S13 holes are in a different spot). Have to use S13 front sway bar. It does bolt into the rubbers and clamps on the chassis just and not as good as the stanza one does. Running a stanza front sway bar didn't clear the bottom of the coil overs (tein).

_________________
Redtop SR20DET into a 1980 Stanza
4 Door 720
Blog


Last edited by 2ndTimeStanza on Thu May 29, 2014 10:19 am, edited 1 time in total.

Top
 Profile  
Reply with quote  
PostPosted: Thu May 29, 2014 9:39 am 
Offline

Joined: Sat Aug 05, 2006 8:27 pm
Posts: 19
Thanks for the input mate, greatly appreciated and good way to do it.

Anyone else completed the conversion?


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC + 10 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group