ozdat.com
http://ozdat.com/forum/

1600 Heated Screen
http://ozdat.com/forum/viewtopic.php?f=27&t=34298
Page 1 of 1

Author:  Mr Dazda 13B [ Mon Aug 08, 2016 10:09 pm ]
Post subject:  1600 Heated Screen

I'm going to order a Heated Screen for my 1600 rally car, as plumbing up a Heater and Fan is too difficult the the Dazda, the Guy that sells them will have a few spares from the production run.

They seen like a good thing.

sales@motorsportwindscreens.com.au

Cheers

John

Author:  Imago [ Tue Aug 09, 2016 9:17 am ]
Post subject:  Re: 1600 Heated Screen

How are they priced compared to a conventional windscreen?

Author:  SR20Datsun [ Tue Aug 09, 2016 9:52 am ]
Post subject:  Re: 1600 Heated Screen

Very interesting. How do they work? Are they just an element laminated onto or into the screen?
Checked the website:
Screens are of course laminated, using full light green tinted glass, having multiple zig zag micro fine Tungsten wires up and down.
Whilst these wires maybe visible close up, from a driving position you wouldn’t even know they are there!
Note : …. All screens are ADR compliant ( Not that that matters if being used solely for motor racing ).

Pretty cool they are ADR compliant too!

Author:  Dave [ Tue Aug 09, 2016 12:34 pm ]
Post subject:  Re: 1600 Heated Screen

Imago wrote:
How are they priced compared to a conventional windscreen?


What he said.

Depending on price, I may be interested as I'm currently getting my 1600 up to CAMS logbook standard, one thing I need to do is replace the original screen with a laminated one.

Author:  SR20Datsun [ Tue Aug 09, 2016 1:18 pm ]
Post subject:  Re: 1600 Heated Screen

How do you drive the control of these? I assume it would be from a standard 12V in and a relay/switch.

Author:  Coz22a [ Tue Aug 09, 2016 9:51 pm ]
Post subject:  Re: 1600 Heated Screen

SR20Datsun wrote:
How do you drive the control of these? I assume it would be from a standard 12V in and a relay/switch.


Got this from the FAQ part of the website.

What do I need to Install? : It is recommended to install the screen utilizing a 20 – 25 amp fuse in conjunction with an LED indicator. When installing it is imperative to FULLY COVER the edges with sealant, to avoid failure of the element. This will void any warranty!

I am interested pending price, will try emailing them.

Author:  Dave [ Wed Aug 10, 2016 12:20 pm ]
Post subject:  Re: 1600 Heated Screen

I'm also awaiting a reply to my email. Website seems to show price as being around $600-ish for most screens.

Author:  eskylid_1600 [ Mon Aug 15, 2016 1:36 am ]
Post subject:  Re: 1600 Heated Screen

hmmm could be interested also, group buy maybe?

Author:  82skyblue [ Mon Jan 08, 2018 12:09 pm ]
Post subject:  Re: 1600 Heated Screen

$785 + plus freight etc. Updated on FB page mid Dec 17.

Page 1 of 1 All times are UTC + 10 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/